Download PDF

PH21E - SpiraXcel C5000

Applicable Standard : ISO 18752 - CC

product img

Construction

Inner tube

Synthetic rubber - black resistant to oil and water

Reinforcement

  • Double steel wire braids (DN06 - 08)Four high tensile steel wire spirals (DN10 - 31)Six high tensile steel wire spirals (DN38)

Cover

Synthetic rubber - black resistant to abrasion and weather, oil & ozone.

Application

Designed for constant pressure hydraulic lines up to 350 bar, this hose is suitable for use with petroleum or water based fluids in hydraulic systems. It is ideally suited for agricultural, construction, and material handling equipment and systems, where high flexibility and low bending force are essential for ease of installation in confined or complex routing conditions.

Item
Code
Dash
Size
DN Hose
Structure
img
ID
OD
OD
img
WP
img
BP
img
BR/r
img
W
inch mm inch mm psi bar psi bar inch mm kg/m
PH21E-04 -04 06 2WB 1/4 6.7 0.52 13.2 5000 350 20000 1400 2.0 50 0.330
PH21E-05 -05 08 2WB 5/16 8.2 0.59 15.0 5000 350 20000 1400 2.2 55 0.380
PH21E-06 -06 10 4WS 3/8 9.8 0.77 19.5 5000 350 20000 1400 2.5 63 0.660
PH21E-08 -08 12 4WS 1/2 13.1 0.88 22.4 5000 350 20000 1400 3.5 90 0.790
PH21E-10 -10 16 4WS 5/8 16.2 1.06 27.0 5000 350 20000 1400 3.9 100 1.260
PH21E-12 -12 19 4WS 3/4 19.3 1.16 29.5 5000 350 20000 1400 4.7 120 1.390
PH21E-16 -16 25 4WS 1 25.9 1.43 36.4 5000 350 20000 1400 5.9 150 1.930
PH21E-20 -20 31 4WS 1.1/4 32.2 1.74 44.3 5000 350 20000 1400 8.2 208 2.525
PH21E-24 -24 38 6WS 1.1/2 38.7 2.26 57.3 5000 350 20000 1400 12.0 305 4.970

imgTemperature Range : Continuous: -40°C to +120°C

Impulse Cycles : 500,000

Go to Top