Download PDF

PH21F - SpiraXcel C6000

Applicable Standard : ISO 18752 - CC

product img

Construction

Inner tube

Synthetic rubber - black resistant to oil and water

Reinforcement

  • Double steel wire braids (DN06 - 08)Four high tensile steel wire spirals (DN10 - 25)Six high tensile steel wire spirals (DN31 - 38)

Cover

Synthetic rubber - black resistant to abrasion and weather, oil & ozone.

Application

Designed for constant pressure hydraulic lines up to 420 bar, this hose is suitable for use with petroleum or water based fluids in hydraulic systems. It is ideally suited for agricultural, construction, and material handling equipment and systems, where high flexibility and low bending force are essential for ease of installation in confined or complex routing conditions.

Item
Code
Dash
Size
DN Hose
Structure
img
ID
OD
OD
img
WP
img
BP
img
BR/r
img
W
inch mm inch mm psi bar psi bar inch mm kg/m
PH21F-04 -04 06 2WB 1/4 6.7 0.52 13.2 6000 420 24000 1680 2.0 50 0.330
PH21F-05 -05 08 2WB 5/16 8.2 0.59 15.0 6000 420 24000 1680 2.2 55 0.380
PH21F-06 -06 10 4WS 3/8 9.8 0.77 19.5 6000 420 24000 1680 2.5 63 0.660
PH21F-08 -08 12 4WS 1/2 13.1 0.88 22.4 6000 420 24000 1680 3.5 90 0.790
PH21F-10 -10 16 4WS 5/8 16.2 1.06 27.0 6000 420 24000 1680 3.9 100 1.260
PH21F-12 -12 19 4WS 3/4 19.3 1.16 29.5 6000 420 24000 1680 4.7 120 1.390
PH21F-16 -16 25 4WS 1 25.9 1.43 36.4 6000 420 24000 1680 5.9 150 1.930
PH21F-20 -20 31 6WS 1.1/4 32.2 1.96 49.8 6000 420 24000 1680 8.9 225 4.270
PH21F-24 -24 38 6WS 1.1/2 38.7 2.26 57.3 6000 420 24000 1680 12.0 305 5.750

imgTemperature Range : Continuous: -40°C to +120°C

Impulse Cycles : 500,000

Go to Top