S.I.NOCertification bodyScopeCertificate No.
Description
Norms
Product family
Download
1
TUV SUD
"Design, Manufacture of
Braided and Spiral Rubber Hoses for Automotive Application "
0559829Quality Management System
IATF 16949 2016
NA
2TUV SUD
"Design, Manufacture and Sales of
Braided and spiral Rubber Hoses, Industrial rubber hoses,
composite hoses and hose assemblies. "
9910022108
Quality Management System
ISO 9001 2015
NA
3NABLGeneral Requirements for the Competence of Testing & Calibration LaboratoriesTC-16055NABL accreditation ensures that a laboratory has a technically competent quality system, produces reliable and accurate test/calibration results, and complies with globally recognized practices. It enhances customer confidence, promotes international acceptance of test reports, and supports regulatory and trade requirementsISO/IEC 17025:2017NA
4Department of Scientific and Industrial Research Recognition of In-house R&D Unit TU/IV-RD/4679/2020Our R&D centre is recognised by Department of Scientific and Industrial Research(DSIR) for research and new development activitiesNA
NA
5DNV
Flexible Hoses of Non-Metallic Material with Permanently Fitted CouplingsTAP00000SB Rev2Wire Braided HosesSAE J 517 / EN 853 / EN857 / ProprietaryPH253, PH254, PH257, PH258, PH293, PH296, PH297
6DNV Flexible Hoses of Non-Metallic Material without Permanently Fitted CouplingsTAP00002CUAviation Fuel hoseEI 1529 / ISO 1825PH690
7DNV
Flexible Hoses of Non-Metallic Material with Permanently Fitted CouplingsTAP00000SC Rev2Wire Spiral HosesSAE J 517 / EN 856PH277, PH278, PH177, PH178, PH279
8DNV
Materials other than steel for pipes conveying oil or fuel oil: flexible pipe assemblies and compensatorsMEDB00000Y5 - Rev1Braided / Spiral Hoses
SAE J 517 / EN 853 / EN856 / EN857 / Proprietary PH-253, PH-254,PH-257, PH-258,PH-293,PH-296,PH-297,PH-177,PH-277, PH-278, PH-178, PH-279
9DNV
Quality system for the products
MEDD00000VE - Rev1
Braided / Spiral Hoses
SAE J 517 / EN 853 / EN856 / EN857 / Proprietary PH-253, PH-254, PH-257 , PH-258, PH-293,PH-296 , PH-297 , PH-177, PH-277, PH-278,PH-178, PH-279
10DNV-ATEX
Wire Reinforced Fuel Dispensing Rubber hose for Fuel Dispensing pumps with type designation Polyhose, Exitflex 3/4" and 1"
53559-2020-PA-IND
Wire Reinforced Fuel Dispensing Hose for Fuel Dispensing Pumps.
TYPE - 3 EN 1360
PH-442
11DOT
To Meet the test requirements as per the Standard
-
Air Brake hose
SAEJ1402-TYPE A
PH-540
12MSHA Approval
Evaluation of the hydraulic hose cover compoundMSHA IC-256/09Hydraulic hoseSAE J517 / EN 853 / EN 857 / ISO 1436 / ISO 11237 /
ISO 18752 / Proprietary
All Standard cover hoses
13MSHA Approval
Evaluation of the hydraulic hose cover compoundMSHA IC-256/8Hydraulic hoseSAE J517 / EN 856 / ISO 3862 / EN 857 / ISO 11237 / ISO 18752 / ProprietaryAll Standard cover hoses
14MSHA Approval
Evaluation of the hydraulic hose cover compoundMSHA IC-256/14Hydraulic hoseSAE J517 / EN 853 / EN 856/
EN 857 / ISO 1436 / ISO 11237/ ISO 3862 / ISO 18752 / Proprietary
All HardX cover hoses
15MSHA Approval
Evaluation of the hydraulic hose cover compoundMSHA IC-256/4Hydraulic hoseSAE J517 / EN 853 / EN 856/
EN 857 / ISO 1436 / ISO 11237 / ISO 18752 / ISO 3862 / Proprietary
All AbrazonX hoses
16MSHA Approval
Evaluation of the hydraulic hose cover compoundMSHA IC-256/10Hydraulic hoseSAE J517 / EN 853 / EN 857 / ISO 1436 / ISO 11237 /
ISO 18752 / Proprietary
All High Temperature & Ultra High Temperature hoses (Black)
17MSHA Approval
Evaluation of the hydraulic hose cover compoundMSHA IC-256/15
Hydraulic hoseSAE J517 / EN 853 / EN 857 / ISO 1436 / ISO 11237 /
ISO 18752 / Proprietary
All High Temperature & Ultra High Temperature hoses (blue)
18MSHA Approval
Evaluation of the hydraulic hose cover compoundMSHA IC-256/6Hydraulic hoseSAE J517All High Temperature hoses
19MSHA Approval
Evaluation of the hydraulic hose cover compoundMSHA IC-256/11Hydraulic hoseSAE J517 / EN 853 / EN 857 / ISO 1436 / ISO 11237 /
ISO 18752 / Proprietary
All Standard cover hoses (Red, Yellow, Blue, Green colour)
20MSHA Approval
Evaluation of the hydraulic hose cover compoundMSHA IC-256/13Fuel hoseEN 1360 TYPE-3Fuel dispensing hoses
21MSHA Approval
Evaluation of the hydraulic hose cover compoundMSHA 2G-IC-256C/01Fire Suppression hoseProprietaryFire Suppression hose
22iCAT (International Centre for Automotive Technology)
To Meet the test requirements as per the Standard
CD0CM0431
Air Brake hose
SAE J 1402 TYPE A
PH-540
23iCAT (International Centre for Automotive Technology)
To Meet the test requirements as per the Standard
CD0CM1057
Air Brake hose
SAE J 1402 TYPE A
PH-540
24iCAT (International Centre for Automotive Technology)
Extension of validity of the earlier test report no. CT0CF0767 dated 27.04.2010 of 1/4" CNG Low Pressure Flexible Hose from standard AIS028 and SAE J30 R6 IS 15722:2006 to with a different internal and outer diameter
CT1CK1218
CNG Low Pressure flexible hose
SAE J30 R6
PH-536
25iCAT (International Centre for Automotive Technology)
Extension of validity of the earlier test report no. CT0CK1825 dated 24.06.2015 of 1/2" CNG Low Pressure Flexible Hose from standard SAE J30 R6 and AIS 028 to IS 15722:2006 to with a different internal and outer diameter
CT1CK1974
CNG Low Pressure flexible hose
SAE J30 R6
PH-536
26iCAT (International Centre for Automotive Technology)
Extension of validity of the earlier test report no. CT0CF0766 dated 27.04.2010 of 3/8" CNG Low Pressure Flexible Hose from standard SAE J30 R6 and AIS 028 to IS 15722:2006 to with a different internal and outer diameter
CT1CK1217
CNG Low Pressure flexible hose
SAE J30 R6
PH-536
27iCAT (International Centre for Automotive Technology)
Extension of validity of the earlier test report no. CT0CF0767 dated 27.04.2010 of 1/4" CNG Low Pressure Flexible Hose from standard SAE J30 R6 and AIS 028 to IS 15722:2006 to with a different internal and outer diameter
CT1CK1218
CNG Low Pressure flexible hose
SAE J30 R6
PH-536
28iCAT (International Centre for Automotive Technology)
Extension of validity of the earlier test report no. CT1CK1217 dated 29.04.2015 of 3/16" CNG Low Pressure Flexible Hose from standard IS 15722:2006 to with a different internal and outer diameter
CT2BL5008
CNG Low Pressure flexible hose
SAE J30 R6
PH-536
29iCAT (International Centre for Automotive Technology)
Extension of validity of the earlier test report no. CT0CF0766 dated 27.04.2010 of 5/16" CNG Low Pressure Flexible Hose from standard SAE J30 R6 and AIS 028 to IS 15722:2006 to with a different internal and outer diameter
CT2LL0047
CNG Low Pressure flexible hose
SAE J30 R6
PH-536
30iCAT (International Centre for Automotive Technology)
To evaluate performance of LPG hose assembly as the requirements given in IS 9573:2012 amended up to date
CT0BL5055
LPG Hose
IS 9573:2012 Type-1
PH-535
31iCAT (International Centre for Automotive Technology)
To evaluate performance of LPG hose assembly as the requirements given in IS 9573:2012 amended up to date
CT0BL5054
LPG Hose
IS 9573:2012 Type-1
PH-535
32iCAT (International Centre for Automotive Technology)
To evaluate performance of LPG hose assembly as the requirements given in IS 9573:1998 amended up to date
CT0CE1398
LPG Hose
IS 9573:1998
PH-535
29SAESAE J1942-1 Listing-Braided / SpiralSAE J517
EN 853
EN 857
EN856		PH253
PH254
PH257
PH258
PH293
PH177
PH178
PH279
PH277
PH278
33iCAT (International Centre for Automotive Technology)
To evaluate performance of Hydraulic Brake hose assembly as per requirements given in
IS 7079-2008 with Amdenment No 1 Dt. Sept 2011
CT0CU1076Hydraulic Brake HoseIS 7079-2008PH138
34SAEQualified Hoses for Marine Applications (USCG)SAE J1942-1 DEC 2022Braided / Spiral HosesSAE J517 / EN 853 / EN 856 / EN 857PH253, PH254, PH257, PH258, PH293, PH177, PH178, PH279, PH277, PH278
35Government of India,
Ministry of Commerce and Industry,
Department of Commerce,
Directorate General of Foreign Trade		Provisions of the
Foreign Trade Policy,2023		CHNSTATAPPLY00000267AM24Three Star Export HouseForeign Trade Policy,2023NA
S.I.NOCertification
body		ScopeCertificate No.
Description
Norms
Product family
Download
1
TUV SUD
Design, Manufacture, Assembly and Sales of Spiral and Cross braided high pressure thermoplastic hose, PTFE hose, Industrial hose and PVC braided hose
9910020952
Quality Management System
ISO 9001:2015
NA
2
TUV SUD
Manufacture and Assembly of thermoplastic hoses and PTFE hoses for Automotive application
0535654
Quality Management System
IATF 16949:2016
NA
3
TUV SUD
Design, Manufacture, Assembly and supply of thermoplastic tube, spiral and Cross braided high pressure thermoplastic hose, PTFE hose & PVC braided hose for Industrial & Automotive application
9910400186
Environmental Management SystemISO 14001:2015
NA
4
TUV SUD
Manufacturer and supply of Thermoplastic Tubes for Medical application99 400 00020
Quality Management SystemISO 13485:2016NA
5
UL LLC
Certificate of Compliance - AIRLESS PAINT SPRAY HOSE ASSEMBLIES
MH45108-20060817TYPE APPROVAL

"UL 1450, Motor-Operated Air Compressors, Vacuum
Pumps, And Painting Equipment"
"Model 1P04PS Nominal Size:
1. 1/4 in. - with Conductive Layer - 0.520 in. OD,0.255 in. ID
2. 1/4 in. - with Conductive Strip – 0.475 in. OD, 0.255 in. ID
3. 5.5 mm - with Conductive Strip - 0.425 in. OD and 0.217 in. ID
4.Model PH344-04, 1/4 in. - with conductive Stripe - 0.475 in. OD, 0.255 in. ID
5. Model no PH737-05, 8.0 mm - with Conductive Stripe - (13.2mm OD and 8 mm ID)"
6
DNV-GL
High-pressure hoses with permanently fitted couplings to be used in the gas inflation systems for inflatable life-saving appliances.TAP0000172
TYPE APPROVAL
ISO 15738:2019
PH194-05: High Pressure Hose

PH194-05-010: Hose assembly
7DNV-GLManufacture and testing of Thermoplastic/PTFE Hoses
(Type: PH/EF 148, PH/EF 149 & PH/EF 179 series)		3587-2013-CE-IND-DNVTYPE APPROVALSAE 100 R7 & R8/ DIN EN ISO 3949 ,SAE J517/ 100 R14
Regular & Non-Conductive Type Thermoplastic hosesPTFE HOSE
PH/EF148-02PH/EF149-02PH/EF179-03
PH/EF148-03PH/EF149-03PH/EF179-04
PH/EF148-04PH/EF149-04PH/EF179-05
PH/EF148-05PH/EF149-06PH/EF179-06
PH/EF148-06PH/EF149-08PH/EF179-07
PH/EF148-08PH/EF149-10PH/EF179-08
PH/EF148-10PH/EF149-12PH/EF179-10
PH/EF148-12PH/EF149-16PH/EF179-12
PH/EF148-16PH/EF179-14
PH/EF179-16
PH/EF179-18
PH/EF179-20
8"MSHA
U.S. DEPARTMENT OF LABOUR "
Hydraulic hose cover (Compound 1190A10FHF)
IC-256/12

TYPE APPROVAL
Marine Steering hose & Marine Fast Response Hose
"PH393 - Marine Steering hose
PH394 - Marine Fast Response Hose"
9
"NHTSA
DOT APPROVAL
U.S. DEPARTMENT OF TRANSPORTATION "
Brake Hoses
"LETTER DATED : JUNE 8, 2012
SYMBOL : ""POLYHOSE"""

Federal Motor Vehicle Safety Standard - FMVSS 106
POLYAMIDE TUBE 6 mm, 8mm, 12 mm

10BUREAU OF INDIAN STANDARDS (BIS)
Water Hoses
CNBO-II / L-3311638
ISI APPROVAL
IS 444 :1987
PH365L-12 :Water Hose

11
BUREAU OF INDIAN STANDARDS (BIS)
Welding Hoses
CNBO-II / L-6496994

ISI APPROVAL
IS 447 :1988
PH362-05 : Welding Hose

10NHTSA DoT APPROVAL U.S. DEPARTMENT OF TRANSPORTATION Plastic Air Brake TubeLETTER DATED : March 28, 2025
SYMBOL : TYPE A POLYHOSE Federal Motor Vehicle Safety Standard - FMVSS 106 SAE J 844 TYPE A Tubes, 1/8", 5/32", 3/16" , 1/4"
Federal Motor Vehicle Safety Standard - FMVSS 106SAE J 844 TYPE A Tubes, 1/8", 5/32", 3/16" , 1/4"
11NHTSA DoT APPROVAL U.S. DEPARTMENT OF TRANSPORTATIONPlastic Air Brake TubeLETTER DATED : DECEMBER 4, 2023
SYMBOL : TYPE B POLYHOSE Federal Motor Vehicle Safety Standard - FMVSS 106 SAE J 844 TYPE B Tubes, 3/8", 5/8"		Federal Motor Vehicle Safety Standard - FMVSS 106SAE J 844 TYPE B Tubes, 3/8", 5/8"
12NHTSA DoT APPROVAL U.S. DEPARTMENT OF TRANSPORTATION Plastic Air Brake TubeLETTER DATED : JANUARY 1, 2024
SYMBOL : TYPE B PH Federal Motor Vehicle Safety Standard - FMVSS 106 SAE J 844 TYPE B Tubes, 1/2", 3/4"		Federal Motor Vehicle Safety Standard - FMVSS 106SAE J 844 TYPE B Tubes, 1/2", 3/4"
13LAPI LABORATORIO PREVENZIONE INCENDI S.P.A
Ship & Marine Technology - Fire Resistance Of Hose Assemblies
0987/MED-B/974
EC-Type Examination
ISO 15540 : 1999/COR 1:1999, UNI EN ISO 15540 : 2003
PH779-06 : Flexible Pipe Assemblies




14ARAI
(The Automotive Research Association of India)
To Meet the test requirements as per the StandardAN2621Hydraulic Brake Hose – Type Approval.SAE J1401 /
IS 7079:2008
PH - 777
15Government of India,
Ministry of Commerce and Industry,
Department of Commerce,
Directorate General of Foreign Trade		Provisions of the
Foreign Trade Policy,2023		CHNSTATAPPLY00000216AM24Three Star Export HouseForeign Trade Policy,2023NA

TISAX ENX Association
S.I.NOScope IDScope Type Assessment Level ObjectiveLocation ID Scope Valid Till Download
16SV9YFHStandard Scope 2.0AL3Information with High Protection Needs and Information with Very High Protection Needs.LHM37X10.04.2027
S.I.NO Organ certyfikującyZakresNumer rejestracyjny certyfikatuOpis NormyGrupa produktówPobierz
1TUV SUDManufacture of thermoplastic, Rubber and PTFE Hose Assemblies 0456074Quality Management System IATF 16949:2016 NA
2TUV SUDManufacture of Thermoplastic, Rubber and PTFE hose assemblies99 100 21151Quality Management SystemISO 9001:2015NA
3TUV SUDManufacture of Thermoplastic, Rubber and PTFE hose assemblies99 104 01294Environmental Management System ISO 14001:2015NA
4DNVRubber Hose and Hose assemblies with and without internal vapour recovery for fuel dispensing systemsC521221 Rev. 0TYPE APPROVALNARubber Hose and hose assemblies with and without internal vapour recovery for fuel dispensing systems -EN 13483:2013 &
EN 1360:2013
5ARAI
(The Automotive Research Association of India)
To Meet the test requirements as per the StandardAN2621Hydraulic Brake Hose – Type Approval.SAE J1401 /
IS 7079:2008
PH - 777
S.I.NO Organ certyfikującyZakresNumer rejestracyjny certyfikatuOpis NormyGrupa produktówPobierz
1TUV SUDManufacture of thermoplastic, Rubber and PTFE hoses assemblies for Automotive application 0500510Quality Management SystemIATF 16949:2016 NA
S.I.NOOrgan certyfikującyZakresNumer rejestracyjny certyfikatuOpis Normy
Grupa produktówPobierz
Polyhose India Pvt Ltd(Aerospace Division)
1TUV SUD
Design of PTFE hoses & metal end fittings, manufacturing and sales of PTFE hose, assembly & metal tube sub assembly for aerospace applications951187402
Quality Management System
AS9100D &
ISO 9001:2015
NA
2NADCAP
Fluid Distribution Systems
AC7112 Rev C - Nadcap Fluids Systems Manufacturers Audit Criteria
AC7112/1 Rev A - Nadcap Hose Manufacturing Audit Criteria
AC7112/2 Rev B - Nadcap Audit Criteria for Fittings and Other Machined Components
AC7112/4 Rev B - Nadcap Hose Assembly Audit Criteria		17499223633PRI - QML (Qualified Manufacturer List) - Fluid Distribution SystemAC7112 Rev C
AC7112/1 Rev A
AC7112/2 Rev B
AC7112/4 Rev B		- PTFE Extruded Inner Tube
-Reinforced(Pressure Containment Hose)
- AS4370
- General Fittings and other machined components
- AS1339 PTFE CRES Braided Hose Assembly
- AS1946 PTFE CRES Braided Hose Assembly
3DGAQA
(Directorate General of Aeronautical Quality Assurance) 		High Pressure PTFE Hose Assembly as per AS1339, Medium Pressure PTFE Hose Assembly as per AS1946, Aircraft Refuelling hose conforming to EI 1529 Type C/ISO 1825 Type C and Jack Hose Polyhose series PH350, PH351 & PH751DGAQA/REGN/85/2024Design, Development & Production of Aerospace Product NASAE AS1339 series, SAE AS1946 series, PH660 (Aircraft Refuelling hose), PH350, PH351 & PH751
S.I.NOCertification bodyscopeCertificate Registration No.DescriptionNormsProduct FamilyDownload
1TUV SUDManufacture of Thermoplastic, Rubber, PTFE Hose and Metal Tube Assemblies99 100 20483Quality Management SystemISO 9001:2015NA
S.I.NOCertification
body		ScopeCertificate No.
Description
Norms
Product family
Download
1
TUV SUDManufacture of SS flexible hose, SS braids and metal hose assemblies99 100 18838Quality Management SystemISO 9001:2015NA
2
TUV NORDManufacturer of Stainless Steel Flexible corrugated Hose and Hose Assemblies with or without Braid For Pressure Equipment07/203/1409/HP/4380/22Accordance to the rule of
AD 2000-Merkblatt HP0		DIN EN ISO 10380 : 2013-02Size range ¼” to 10”
(DN 6 to DN 250)
3
TUV NORDWelding Manufacturer of Stainless steel Flexible Hose and Hose assemblies with or without Braid, Size Range ¼” to 10” ID (DN 6 to DN 250) in accordance with DIN EN ISO 10380,2013-02, PED 2014/68/EU Art. 4 Abs. or Cat 107/203/1409/HZ/4380/22Quality Management system2014/68/EU, Annex I, point 3.1Size Range ¼” to 10” ID
(DN 6 to DN 250)